mandag, november 19th, 2018

Paint Peeling Method For Xinyu Enameled Wire

Stripping of xinyu Enameled Wire . Let’s talk about the centrifugal knives. This is said to be the first paint stripping equipment introduced in Germany. It is a three-speed high-speed rotating tool that directly peels off the aluminum enamel-coated paint. . This stripping method, like hand-painting, is only suitable for stripping of large lines. As we all know, the physical properties of aluminum, soft and tough, is only half of that of copper. When using a centrifugal knife, it is easily twisted into a rope. It is directly twisted. If you use an aluminum enameled wire with a diameter of 1.5. Below MM, the centrifugal knife is not suitable for you. Even if it is not directly broken, it will be twisted. If you use a smaller diameter aluminum enameled wire, basically do not consider this off.

The another type is the grinding wheel of aluminum enameled wire. Whether you use a wire wheel or a fiber wheel, the temperature of the aluminum wire will rise rapidly with high-speed friction during the process of grinding the aluminum enamel wire. With the high-speed flowing air flow, the surface of the aluminum wire is quickly oxidized and is difficult to handle after being oxidized.

In addition, due to the different materials of the grinding wheel, in general, the aluminum enamel wire of the wire wheel is yellowed, and the aluminum enamel wire of the fiber wheel is grayed or blackened, in any case, the color of the aluminum wire of the wire wheel or the fiber wheel. It is not the silver white of aluminum itself. The thick wire is oxidized to a small extent after grinding by the grinding wheel. It can also see silver white, the effect of fine wire is much worse, and the thin wire is easily broken, and it will become brittle after grinding. So, if your company’s current line is thicker, you can use this method. If it is a thin line, this method is not suitable.

tirsdag, november 13th, 2018

Introduction Xinyu ECCA Wire Information

The professional Enameled Wire supplier – xinyu-enamelediwre, founded in 2002, specializes in the production of copper enameled wire and enameled aluminum wire, ecca wire, etc. We are the industry leading manufacturers, suppliers, wholesalers and exporters in dealing high performing enameled wire.

Enameled copper clad aluminum wire(ecca wire) is a new kind of magnet wire applying CCA as conductor ,which combines the beneficial properties of the wonderful conductivity of copper and the light-weight of aluminum.

Xinyu ECCA Wire Application

1.Special magnet wire applied in voice coils, CD-ROM coils;

2.Light magnet wire for mobiles and watches;

3.Magnet wire for high frequency transformers;

4.Magnet wire for deflexion coils of display;

5.Magnet wire for degaussing coils of display;

6.Other magnet wire

Xinyu ECCA Wire Advantage

A) High-quality raw material adopted.

B) Superior quality with competitive price.

C) Professional technology and sales team.

D) Timely after-sale service.

E) Special specification can be customized, OEM is also accepted.

F) Fast Delivery.

G) Elantas insulation available.

H) Diameter range from 0.18mm to 6.50mm, thermal class from 130 to 220.

I) Longer quality guarantee period, any quality problem we will compensate for your loss.

Advantages of enameled CCA wire:

As envelope alternatives of pure Enameled Copper Wire, it has good performance of high frequency transmission, originally it was applied in various types of high-frequency electromagnetic induction coil; now in order to save more production cost, ECCA wire has been widely used in various types of electronic coils, transformers, inductors, rectifiers, and all kinds of large and small motors, and has excellent soldering performance. Its density is low, the weight of the unit product can at least save 40% of the copper wire, it can save a lot of cost of production material.

Product Features of ECCA Wire:

High breakdown voltage

Good adhesion

Tin soldering

Few pinhole

Sustained and stable quality

If you have any new requirement, please feel free to contact with us. We will try our best to support you and become your long time partner.

fredag, november 9th, 2018

Xinyu TV With a Self-adhesive Magnet Wire

Due to the different types of products, the color TV deflection coil factory has different requirements for the bonding performance of the Enameled Wire. But in summary, there are three main aspects:

(1) It is not sticky at the specified temperature. In order to ensure that the self-adhesive enameled wire for color TV will not be automatically bonded during the manufacturing, transportation and storage process, a bonding test is required, and the enameled wire is heated at 60-100 ℃ for 5 to 60 minutes without stickiness or adhesion. small.

(2) It has adhesive force at a certain experimental temperature and can be bonded automatically. After the enameled wire is wound into a coil, after heating for 10 to 30 minutes at a temperature of 170 to 200 ℃, the enameled wire will be automatically bonded, and the bonding force is usually required to be 2 to 7 N.

(3) Maintaining adhesion at a certain ambient temperature. The bonded molded coil maintains a certain adhesive force at 120 to 150 ℃, that is, its resoftening temperature should be higher than 120 to 150 ℃. Although the enamelling process has a great influence on the bonding properties of the enameled wire, the copolymer composition of the self-adhesive paint is a key factor affecting the bonding properties of the enameled wire.

The self-adhesive layer of the Enameled Copper Wire must have thermoplasticity, that is, it can be melted and bonded at the bonding temperature, or contain residual reactive functional groups, so that it can produce a crosslinking reaction at the bonding temperature, which is equivalent to the occurrence of the self-adhesive layer of the enameled wire. Secondary curing.

Some deflection yoke plants require bonded bonded coils to have a certain bond at high temperatures, i.e., have a higher resoftening temperature. Since the bonding temperature is close to the re-softening temperature, this would require that the self-adhesive layer of the enameled wire must contain residual reactive functional groups that produce a second cure.

The fact that the enameled wire is not sticky after being treated at 60 to 100 ℃ means that the melting temperature of the self-adhesive layer is high, that is, melting or crosslinking can be performed only at a higher temperature.

onsdag, november 7th, 2018

Introduction of Xinyu Heat Grade 130/155/180 Enameled Copper Wire

Xinyu-enameledwire is specialized in manufacturing of Enameled Wire for many years. We also offer OEM and ODM services.

Applications of Xinyu Thermal Class 130/155/180 Enameled Copper Wire:

a) Small transformers, linear motors, relays, solenoids, small motors, clock coils, watch coils,magnetic headsMicrowave transformers;

Windings with light weight, high conductivity, good heat resistance;

Winding used for high frequency signal transmission

Enamelled wire used in small-motor rotor winding .etc.

Magnet wires used in monitor deflection coil;

Magnet wires used in degaussing coil;

Other special magnet wire.

b) Automotive sensors and coils as relais and ignition coils

c) Generators,dry-type or oil-immersed

d) Anti-explosion motor,air-conditioner compressor,washing machine,Magnetic wire used in High Frequency

transformer, common transformer, inductance coils, electromotors, household electromotors and micro-motors;

e) Military and space applications

We are a enameled wire factory, and we have our own foreign trade department, we market our own products. We are never satisfied with the status quo, and be tireless on the road of innovation and pursuing professional knowledge.

mandag, november 5th, 2018

Xinyu Provides You With Enameled Wire

Product standard: IEC

Package: according to customer requirements

Used in production of light weight, relatively high conductivity, heat resistance and good windings, especially the transmission of high frequency signal windings;

Used in magnet wires of high-frequency voltage devices, common transformer, inductance coils, electromotors, household electrical and micro-motors;

Used in electrical tools, ballasts, automotive electronics, refrigerator and air conditioner compress or motors. Such as television sets, electric stove, microwave ovens etc.

Used in electrical appliances, communication tools, instruments, transformers, generators,electromotors, and so on.

1.Product shape: round

Diameters:ranging from 0, 2 to 8.0mm, which translates to 52 – 1 AWG or 35-1SWG

2.Product type:

130deg.C of polyester enameled copper round wire 155deg.C of modifed polyester enameled copper round wire 180deg.C of polyedter imide enameled copper round wire 220deg.C of polyester imied &polyamide imide compound enameled copper round wire

3.product introduction:

Enameled round copper wire is extruded or drawn from oxygen-free copper rod with certain specification mould,then coated with insulating paint on mang times.the product is widely applied in transformer,electromotors,generator and other similar electrical instruments.

4.others:

If specification is out of range,please also don’t hesitate to contact us.Our company is one of the first made of Enameled Copper Wire , complete specification, price, timely delivery, selling products at home and abroad, welcomed the new and old customers to consult and order.

Click here for more information on Aluminum Enameled Wire .

torsdag, november 1st, 2018

Enameled Wire Manufacturers: Eco-friendly Enameled Wire Stripper Formulations

The formula analysis of eco-friendly enameled wire paint remover contains a bit of shortening project development time, saving project funds, and significantly improving project quality. This analysis can make the project occupy the unique industry in the same company, thus creating a special benchmark for the project, so that the production company will always stand in the same industry.

The environmental protection enameled wire paint remover formula is restored through high-tech instruments such as ultraviolet spectrophotometer, ion chromatograph, elemental analysis instrument and so on. Through superior analytical team, complete experimental equipment, and step-by-step inspection procedures. Can significantly improve the quality of detection, more authoritative guarantee of project quality, can save production crisis and technical funding.

Micro-spectroscopy is one of the leading domestic testing and testing institutions. It contains the most powerful technical expert technical support department, the most complete experimental operating room, and the latest testing and testing equipment. Environmental protection enameled wire paint remover formula ingredient detection to find micro-spectrum technology, save time. The largest, most abundant and first-class testing and testing institution in China—Microspectroscopic technology.

Green paint remover is a kind of liquid that is composed of aromatic compound and aromatic compound sample. Its ability to dissolve paint film is strong. Green paint remover is fast and high quality. Release coating type category. Wide, suitable for alkyd, alkyd, polyurea rubber vinyl, epoxy, polyurethane, epoxy and other paints, external wall paint, powder smear, skin fading. Compared with overseas projects of the same type, paint stripping efficiency is the same, paint stripping speed is fast, non-corrosive and avoids a lot of time.

Environmental protection enameled wire paint remover project performance: pass at room temperature, reduce energy and environmental protection. Easy to operate, well managed. Can be soaked and brushed. Spraying, painting, baking paint base paints, paint base paints, acid paints and acid paints are all suitable. The components of the paint remover for environmental protection enameled wire consist of solvents such as alcohols, alcohols, esters and benzene.

Click here to learn more about Enameled Copper Wire .

tirsdag, oktober 30th, 2018

A Brief Round of Enameled Wire Technology

After drawing the felt, there is a rounding process. Because the wire is painted through the felt, the shape of the liquid is olive-shaped. At this time, under the effect of surface tension, the paint overcomes the viscosity of the paint and turns into a circle in an instant.

If the specification of the wire is smaller, the viscosity of the paint is smaller, and the time required for rounding is less; if the specification of the wire is increased, the viscosity of the paint is also increased, and the time required for rounding is also large. In high-viscosity paints, sometimes the surface tension cannot overcome the internal frictional force of the paint, resulting in uneven paint.

When the lacquer wire comes out of the felt, there is also a gravitational effect during the lacquering process. If the rounding time is very short, the olive-shaped sharp corners will soon disappear, the gravitational effect will have a short time, and the conductor coating layer will be even. If the rounding time is longer, the sharp corners at both ends will have a longer time and the gravitational action time will be longer. At this time, the lacquer layer at the sharp corners will have a tendency of downward turbulence, which will increase the thickness of the paint layer in the local area. Tension forces the lacquer into a spherical shape and becomes a particle. Due to the gravitational effect, it is very prominent when the paint layer is thick, so it cannot be painted too thick for each coat. This is one of the reasons why the paint wire is coated with a thin paint.

If there is a very fine burr on the wire, under the effect of surface tension, the burr is not easy to paint, but also easy to lose thinning, resulting in the pinhole of the enameled wire. If the round wire itself becomes elliptical, under the effect of additional pressure during painting, the paint liquid layer is thin at the two ends of the long axis of the ellipse, and is thick at the two ends of the short axis, forming a significant non-uniform phenomenon, so the enameled wire is used the roundness of the round copper wire should meet the requirements.

Click here for more information on Enameled Copper Wire .

torsdag, oktober 25th, 2018

Xinyu Manufacturer and Copper Enameled Wire Brief Introduction

Xinyu-enameledwire is an integrated industrial and trade enterprise specialized in Enameled Wire suppliers, offers thousands of Enameled Copper Wire sizes and types to meet your application and production requirements. xinyu is a professional and reliable China Enameled Copper Wire manufacturers and Enameled Copper Wire suppliers,Xinyu has relied upon their continuing years of experience to assist and solve complex electronic problems with their resource of experienced personnel.

Brief Introduction of Xinyu Enameled Copper Wire

PRODUCT :Enameled copper wire

STANDARD :IEC 60317-34

DATE :26th,Jun.,2017

TYPE :QZ-2/130

SIZE : 0.250mm

We are the domestic professional technology experts of enameled wire, always adhere to the product first, the principle of winning on quality, and firmly believe that integrity management and word of mouth marketing, paying attention to the customer’s purchase experience.

Contact Copper Enameled Wire Manufacturer – Xinyu-enameledwire

Suzhou Wujiang Xinyu Electrical Material Co.,Ltd.

Add :

No. 88, Chuangju Road, Qidu Town, Wujiang, Suzhou,

Jiangsu Province, China

Tel :

+86-512-63056903

Fax :

+86-512-63056903

E-mail :

vivianleng@wjxinyu.com.cn

Website:

https://www.xinyu-enameledwire.com/

Xinyu-enameledwire is willing to cooperate with friends all around the world for a win-win future.

tirsdag, oktober 23rd, 2018

Information of Xinyu Copper Enameled Wire

Xinyu-enameledwire is specialized in manufacturing and exporting various Enameled Wire . Up to now, xinyu enameled wires have exported to more than 30 countries, including Thailand, Malaysia, Indonesia, Turkey, South Korea, Japan, Spain, Mexico, Brazil, etc.

Xinyu-enameledwire strive to provide our customers with the finest possible products, services and solutions at attractive prices in order to cultivate a long-term partnership. We orient ourselves towards our customers’ Requests and design our company processes to be effective and efficient while continually improving quality.

Applications of Xinyu Copper Enameled Wire

180 Enameled Copper Wire

  • Display/laptop PC and tablet PC/flat panel display
    Smart phone/cell phone
    Flat screen TV/ professional TV
    Printer/scanner/fax machine/copier
    Sound box/acoustics
    MP3, MP4 ,CD,DVD player
    Digital camera
    Robot/ industrial /projector /handy terminal /amusement
    Car electronics
    Toy for children
    AV equipment/ medical equipment/ digital measurement instrument

The era gives us new mission, in face with increasingly intense competition, Xinyu Enameled Copper Wire constantly innovate technology, optimize the industrial structure, enhance core competency. Since founded in 2002, Xinyu-enameledwire insists to learn from domestic and foreign advanced management experience and technology, brings high quality products and service to customers, so as to seek for more stable development. At present, Xinyu possesses professional technology & sales team, advanced production and inspection equipment, authoritative certifications and learning-oriented enterprise culture, and has occupied a position in the international market, showing vigorous development.

fredag, oktober 19th, 2018

Enameled Copper Clad Aluminum Wire from Xinyu-enameledwire

Xinyu Enameled Copper Clad Aluminum Professional Wire is a new kind of Copper Enameled Wire applying CCA as conductor, which combines the beneficial properties of the wonderful conductivity of copper and the light-weight of aluminum.

Advantages of Xinyu Enameled Copper Clad Aluminum Professional Wire:Light

220 Enameled Copper Wireweigh

Light-weightt

Enameled Copper Wire Supplier Xinyu Enameled Copper Clad Aluminum Professional Wire is about one-third density of copper wire of the same diameter.

This is extremely advantageous for reducing the weight of the coil.

DC resistance

The DC resistance of CCA wire is about 1.5 times of copper wire. And CCA

wire is the only half weight of copper wire at the same resistance .

Good Solderability

Because of cladding with copper on the surface of CCA wire,it has the same

solderability with the copper wire.

Application Xinyu Enameled Copper Clad Aluminum Professional Wire:

-Special magnet wire applied in voice coils.CD-ROM coils

-Light magnet wire for mobiles and watches

-Magnet wire for moving coils of mini-motor

-Magnet wire for high frequency transformers

-Magnet wire for deflexion coil of display.

-Magnet wire for demagnetizing coils

-Dedicated transformers coils

-Hand welding machine coils

Other special magnet wire coils

Xinyu-enameledwire supplies different kinds of Enameled Wire products. High quality and reasonable price. with good quality at the reasonable price. Quality! Professiona! Responsible! Do our best for all of you!

Næste side »